Make sure this part fits

Mopar 4896061AB
Air Bag Sensor, Front

2006-2010 Mopar 4896061AB

Customer Questions & Expert Answers (12)
Mopar 4896061AB Air Bag Sensor, Front
Mopar 4896061AB Air Bag Sensor, Front
  • Part Description
    Sensor - Impact; Air Bag Impact Sensor, Front, Rear
  • Position
    Front
  • Replaces
    4672311AA, 52851601AB, 4896061AA
  • Manufacturer
    Mopar
Make sure this part fits
$75.57 MSRP: $112.00
You Save: $36.43 (33%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2009 Chrysler AspenLimited, Limited Hybrid8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    2007-2009 Chrysler SebringBase, LX, Limited, Touring4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2008-2009 Dodge AvengerR/T, SE, SXT4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
    2007-2009 Dodge CaliberR/T, SE, SRT-4, SXT4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2007-2009 Dodge DurangoAdventurer, Limited, Limited Hybrid, SE, SLT, SXT6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
    2007-2010 Dodge NitroDetonator, Heat, R/T, SE, SLT, SXT, Shock6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
    2006-2008 Dodge Ram 1500Laramie, SLT, SRT-10, ST, SXT, Sport, TRX410 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
    2007-2009 Jeep CompassLimited, Sport4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    2008-2009 Jeep LibertyLimited, Sport6 Cyl 3.7 L GAS
    2007-2009 Jeep PatriotLimited, Sport4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Any idea if 4896061AB will fit my car? Posted by JeepPartsDeal Specialist
    A:
    To confirm compatibility of the 4896061AB, Select Your Vehicle first.
    Posted by JeepPartsDeal Specialist
    Q:
    What should be checked regarding the rivet nut securing the side impact sensor for the 2008 Chrysler Aspen? Posted by Customer
    A:
    Ensure the rivet nut is properly installed and in good condition within the inner C-pillar.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What should be done after removing the screw for the 2009 Chrysler Sebring? Posted by Customer
    A:
    Disconnect the electrical connector from the sensor.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the first step to service the side impact sensor located in the C-pillar for the 2007 Dodge Caliber? Posted by Customer
    A:
    First, disconnect and isolate the battery negative cable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    Why is it important to wait two minutes after disconnecting the battery for the 2009 Dodge Avenger? Posted by Customer
    A:
    To prevent serious or fatal injury.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What should be done if the front impact sensor is dropped for the 2009 Dodge Durango? Posted by Customer
    A:
    The sensor must be replaced.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    How do you access the left front impact sensor for the 2009 Dodge Nitro? Posted by Customer
    A:
    Raise and support the vehicle, then remove the access plug from the front of the left front wheel house liner.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the first step to service the side impact sensor on a standard cab for the 2008 Dodge Ram 1500? Posted by Customer
    A:
    Disable the Supplemental Restraint System (SRS) by disconnecting and isolating the battery negative cable and waiting two minutes for the system capacitor to discharge.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the first action to take when removing the impact sensor for the 2009 Jeep Compass? Posted by Customer
    A:
    Remove the screw that secures the impact sensor to the right or left radiator support vertical member.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    Are the front and side impact sensors interchangeable for the 2009 Jeep Liberty? Posted by Customer
    A:
    Yes, the front and side impact sensors are interchangeable.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What should be done after removing the screw for the 2008 Jeep Patriot? Posted by Customer
    A:
    Disconnect the engine compartment wire harness connector from the front impact sensor connector receptacle and then remove the front impact sensor from the engine compartment.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    Q:
    What is the first step to service the front impact sensor for the 2009 Jeep Wrangler? Posted by Customer
    A:
    Disable the Supplemental Restraint System (SRS) by disconnecting and isolating the battery negative cable and waiting two minutes for the system capacitor to discharge.
    Posted by JeepPartsDeal Specialist
    See vehicle specific detailed answers for this Air Bag Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Mopar Air Bag Sensor, Front 4896061AB Designed for Proper Fit and Performance

The Mopar part 4896061AB Air Bag Sensor, Front comes from authorized Mopar dealerships in the United States which provide a warranty from the manufacturer. The Mopar Air Bag Sensor component functions as a reliable support element for essential vehicle systems through its engineered design. This part 4896061AB Air Bag Sensor, Front supports Jeep Wrangler, Liberty, Patriot alongside Dodge Ram 1500, Durango, Avenger, Chrysler Sebring, Aspen. This item achieves top performance levels which can be identified through its Manufacturer Part Number: 4896061AB. The authentic Mopar component produced by Mopar functions as a Sensor - Impact; Air Bag Impact Sensor, Front, Rear and fits into the Front of the vehicle.
The part 4896061AB uses durable material for construction and it weighs 0.40 Pounds while its dimensions are 1.2 x 1.4 x 2.6 inches. The product is offered in New condition and functions as a Direct Replacement part to maintain vehicle compatibility and it also known by the names Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor Impact C Pillar; Sensor Impact. This product functions as a substitute for 4672311AA, 52851601AB, 4896061AA. This part 4896061AB is necessary for every vehicle. The inventory system lists this product with SKU: 4896061AB. The official Mopar supports this product which delivers dependable performance along with high quality. Our Shipping Policy and Return Policy pages contain all details about shipping and return procedures.
The quality of OEM parts, supplied directly by Mopar, is superior, as well as durable, with a perfect fit. They receive intense inspections on quality which guarantees its safety, durability and its performance that is as per your original components. Here on our website, we provide competitively priced genuine Mopar parts you can find. Our OEM components are backed by the manufacturer's warranty. Additionally, all orders placed with us benefit from our hassle-free return policy and swift delivery service.