2002 Chrysler Sebring Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2002 Chrysler Sebring

• Q:

  How to Service and Repair a Clock Spring Assembly on 2002 Chrysler Sebring?

  A:

  To replace the Clock Spring Assembly, disconnect the battery, wait two minutes and remove the steering wheel. Replace clock spring if deployed or damaged Center it prior to reinstalling and then attach the multi-function switch and tighten. Finally, connect the air bag leads and make sure that they are installed properly before reconnecting the battery.
• Q:

  What Needs Replacement After Airbag Deployment on 2002 Chrysler Sebring?

  A:

  After a Driver airbag deploys, replace the Driver airbag, Steering Wheel, Clock Spring, and Steering Column assembly, along with any damaged parts. For a Passenger airbag deployment, replace the Passenger airbag and Instrument Panel and Pad Assembly, inspecting and replacing any other damaged components as needed.
• Q:

  How to Service the Air Bag Control Module on 2002 Chrysler Sebring?

  A:

  To service the Air Bag Control Module, disconnect the negative on the battery and wait two minutes. Remove the required parts such as shifter knob and screws on the console to access the module. After installation make sure to check parts for proper torque and reassemble before reconnecting the battery until the diagnostics have been completed.