2002 Chrysler Voyager Door Hinge, Door Latch Assembly, Door Lock Actuator Motor, Exterior Door Handle

Door Hinge, Door Latch Assembly, Exterior Door Handle Installation and Repair Tips for 2002 Chrysler Voyager

• Q:

  How to Service and Repair a Door Hinge on 2002 Chrysler Voyager?

  A:

  To fix the front door hinge, open the door and mark the footprint of the hinge. Support the door and remove the bolts of the hinge and take out the hinge. Install a new hinge with proper seating of hinge pin. Reattach the door and tighten bolts to 34 N.m and check alignment.
• Q:

  How to Maintain and Fix a Sliding Exterior Door Handle on 2002 Chrysler Voyager?

  A:

  In order to replace the sliding door handle, take out the trim panel and stop bumper. Take the handle fasteners, unscrew the linkage clip and remove the handle. Install the new handle, attach it and reconnect the linkage. Test and re-check operation, adjuster where necessary, and re-fit watershield, bumper and trim panel.
• Q:

  How to Service and Repair a Front Door Latch Assembly on 2002 Chrysler Voyager?

  A:

  To fix the latch for the front door, roll up the glass, remove the trim panel and watershield if necessary. Disconnect the power lock motor, remove linkages and screws to remove the latch. Reinstall by reversing steps and make sure you torque and check operation before reassembling trim panel.