2002 Chrysler Voyager Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2002 Chrysler Voyager

• Q:

  How to Maintain a Windshield Washer Fluid Reservoir on 2002 Chrysler Voyager?

  A:

  In order to clean the windshield washer reservoir, unconnect the battery, take out the engine air housing, and loosen the washer hoses. Pour out the fluid, snap off electrical connections and take out the reservoir. Installation Re-Installation must be done in reverse so that the connections and torque requirements are met, and the system is checked.
• Q:

  How to Replace a Front Wiper Arm Without Causing Damage on 2002 Chrysler Voyager?

  A:

  In order to replace front wiper arms, park the driver side on top of the passenger side. Wring off the arm cap and nut and then pull off the arm with a two-jaw puller. Make sure the wiper motor is in park position, screw in the arm with a nut tightly tightened to 35 Nm and put the cap back.
• Q:

  How to Replace and Service a Front Wiper Motor on 2002 Chrysler Voyager?

  A:

  In order to replace the front wiper motor, unscrew the four backwall bolts, and four brace nuts, and remove the wiper linkage. Unscrew the wire connectors on the motor and eliminate the motor. To install the motor, reconnect all and make sure the wiper motor parks properly on switching OFF.