2003 Dodge Neon Wiper Motor, Windshield Wiper, Windshield Washer Fluid Reservoir, Wiper Arm

Windshield Washer Fluid Reservoir, Wiper Arm, Wiper Motor Installation and Repair Tips for 2003 Dodge Neon

• Q:

  How to Maintain and Fix a Windshield Washer Fluid Reservoir on 2003 Dodge Neon?

  A:

  In order to fix the windshield washer reservoir, disconnection of the battery, raising of the car, and emptying of the reservoir. Take out the reservoir, pump and put the pump and reservoir in again but use fasteners. Connect the hose and wire again, fill up the reservoir, lower the vehicle and reconnect the battery.
• Q:

  How to Maintain a Wiper Motor on 2003 Dodge Neon?

  A:

  To service the wiper motor, remove the wiper module and remove the linkage from the motor crank. Remove motor mounting screws and then attach the new motor and tighten the screws to 5-6 Nm. Make sure the motor is parked before replacing the linkage and wiper module, and grease as required.
• Q:

  How to Maintain and Fix a Wiper Arm on 2003 Dodge Neon?

  A:

  To repair the wiper arm, put the arm in the PARK position and turn off ignition. Remove the cap of the arm and the retaining nut, and then remove the arm. Clean pivot shafts, re-install arm, tighten nut and check wipers return to PARK before ignitions are turned off.