2003 Dodge Stratus Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Control Module, Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2003 Dodge Stratus

• Q:

  How to Service an Air Bag Sensor on 2003 Dodge Stratus?

  A:

  The satellite acceleration sensor can be serviced by disconnecting the battery negative cable and waiting two minutes. Disassemble the lower B-pillar trim, unplug the SAS connector and take away the sensor. Install new sensor, tighten screws to 7 N.m, reconnect SAS and install trim. Before reconnecting the battery, diagnosis of the airbag system should be made.
• Q:

  How to Service a Clock Spring Assembly on 2003 Dodge Stratus?

  A:

  To service the Clock Spring Assembly, disconnect the battery negative cable and wait two minutes. Remove the steering wheel and replace the clock spring if the air bag deployed. Center the clock spring, install the multi-function switch, and reconnect all wires. Do not reconnect the battery until the air bag system is tested.
• Q:

  What Actions Are Necessary After an Airbag Deployment on 2003 Dodge Stratus?

  A:

  After a collision replace the Driver air bag, Clock Spring Assembly, Steering Wheel and Steering Column Assembly. For Passenger air bag deployment - Replace the Passenger air bag and Instrument Panel. For Curtain air bags, Replacing Curtain air bag Assembly with trim. Check all other parts and clean the car completely.
• Q:

  How to Service an Air Bag Control Module on 2003 Dodge Stratus?

  A:

  To service Occupant Restraint Controller, remove the battery negative cable and wait two minutes. Remove the shifter knob and console screws and disconnect the ORC. For installation, position the ORC, connect the harness and lock it. Reinstall components, except making sure diagnostics are done prior to reconnecting the battery.