2006 Dodge Durango Clock Spring, Airbag, Air Bag Control Module, Air Bag Sensor

Air Bag Sensor, Airbag, Clock Spring Installation and Repair Tips for 2006 Dodge Durango

• Q:

  How to Maintain an Airbag in the Side Curtain on 2006 Dodge Durango?

  A:

  In order to service side curtain air bag, disable the system by disconnection of battery negative cable and allowing two minutes. Protective clothing should be used when working with the air bag. Take out the headliner and unattach the air bag. Install the new air bag, making sure that it is perfectly aligned and attach all connections then attaching the battery again.
• Q:

  How to Maintain a Clock Spring Assembly on 2006 Dodge Durango?

  A:

  To work on the Clock Spring assembly, disable the supplemental restraint system by disconnecting the battery negative cable. Take off the driver air bag, steering wheel and shrouds. Change or re-use the Clock Spring, centering it correctly. Reinstall components, reconnect the battery and make sure all connections are tight.
• Q:

  How to Service an Air Bag Sensor in the Side Front Door on 2006 Dodge Durango?

  A:

  To service the side front door impact sensor, remove the battery negative cable and wait for two minutes. Remove the door trim and inner panel to gain access to the sensor. Disconnect & Replace Sensor Making sure that the sensor is installed properly. Reinstall trim and don't reconnect battery until the verification test is done.