2006 Jeep Liberty Camshaft, Timing Chain, Timing Cover, Cam Gear

Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2006 Jeep Liberty

• Q: How to Assess Timing Chain Wear on 2006 Jeep Liberty?

  A: To measure timing chain wear, remove the timing chain cover and rotate the engine clockwise until maximum tensioner piston 2 extension is reached. Measure the distance between the secondary timing chain tensioner housing and the piston step ledge; it should be less than 15 mm (0.5906 inches) for replacement.
• Q: How to Remove the Left Camshaft on 2006 Jeep Liberty?

  A: In order to disengage the left camshaft, do not place the timing chain under rotation. The cam sprocket and chain are used with Special Tool 8379. Also connect the engine to TDC using cylinder number 1, indicate timing chain, and loosen sprocket bolt. Take off camshaft, lubricate journals, and replace in that order making sure of correct torque.
• Q: How to Service the Timing Cover and Chain on 2006 Jeep Liberty?

  A: To service the timing chain, disconnect the battery, drain the cooling system and remove the fan assembly. Disconnect hoses, remove the accessory drive parts, and the timing cover. Clean surfaces, check for o-rings, put on sealant, pop in parts, reconnect hoses and fill the cooling system then reconnect the battery.