2008 Dodge Grand Caravan Camshaft, Timing Chain, Timing Cover, Cam Gear

Cam Gear, Camshaft, Timing Chain, Timing Cover Installation and Repair Tips for 2008 Dodge Grand Caravan

• Q:

  How to Service and Repair a Cam Gear and Timing Chain on 2008 Dodge Grand Caravan?

  A:

  In order to fix the timing chain and the camshaft sprocker, one should begin by removing the negative battery cable. Open the timing chain cover and move the crankshaft and move the timing marks to match. The following step is to remove camshaft sprocket bolt, timing chain and sprocket and lastly crankshaft sprocket.
• Q:

  How to Install a Timing Cover and Its Components on 2008 Dodge Grand Caravan?

  A:

  To fit the timing cover, wipe the mating surfaces and take off the crankshaft oil seal. Install a new gasket and align the oil pump and screw the timing cover on. Fit the oil seal, water pump and other parts and pour the crankcase with oil and attach the battery.
• Q:

  How to Install the Cam Gear and Timing Chain on 2008 Dodge Grand Caravan?

  A:

  In order to fit the timing chain and camshaft sprocket, the crankshaft needs to be turned to 12 o'clock position and grease the parts. It is recommended to align the timing chain with the sprockets, aligning it with a straight edge, tighten the camshaft bolt to 54 Nm, and replace the timing chain cover and battery cable.
• Q:

  How to Remove a Camshaft from an Engine on 2008 Dodge Grand Caravan?

  A:

  In order to remove the camshaft, you will first have to remove the radiator and cooling fans, then the cylinder heads, the timing chain and the camshaft sprocket. Remove the yoke retainer and hydraulic lifters and note tappet positions. Finally remove the camshaft slowly using a long bolt, mind not to damage the bearings.