2008 Dodge Ram 3500 A/C Compressor, A/C Condenser, A/C Hose

A/C Compressor, A/C Condenser, A/C Hose Installation and Repair Tips for 2008 Dodge Ram 3500

• Q:

  How Can Proper Maintenance of the A/C Condenser Prevent System Malfunction and Compressor Damage on 2008 Dodge Ram 3500?

  A:

  During the work of servicing the A/C system, the level of refrigerant oil should be adjusted to avoid malfunctions. When substituting the condenser, add 30 milliliters of oil. O-ring seals and gaskets should always be replaced to prevent leakages. Install the condenser and fan, daisy wire the system and charge the refrigerant system as required.
• Q:

  How to Remove and Replace a Visteon A/C Compressor Clutch on 2008 Dodge Ram 3500?

  A:

  To replace the Visteon A/C compressor clutch, align the clutch field coil and install it with the special tools. Secure the wire lead, install pulley and give proper seating. Use original shims for a new clutch assembly, tightening bolts, air gap check and reconnect components before executing the break-in procedure.
• Q:

  How to Service and Repair an A/C Hose on a 5.7L Engine for Discharge Line on 2008 Dodge Ram 3500?

  A:

  To service the HVAC discharge line on a 5.7L engine, remove the negative battery cable and recover refrigerant. Disconnect A/C pressure transducer, and remove discharge line from condenser and compressor, throwing out O-rings and gaskets. Finally, disconnect the discharge line from the engine compartment.