How to Replace a MAP Sensor on 2000 Chrysler Cirrus?

To replace the MAP sensor, you need to disconnect the negative battery cable and the electrical connector. Remove the Sensor and Install New Sensor, Make Sure The O-Ring is Intact Tighten up screws to 3.4 Nm, reconnect the electrical connector and reinstall the negative battery cable.

OEM 2000 Chrysler Cirrus MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2000 Chrysler Cirrus M.A.P. Sensor Part Number: 5293985AA
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.3 x 1.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5293985AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX | 4 Cyl 2.0 L GAS
View related parts
2000 Chrysler Cirrus M.A.P. Sensor Part Number: 5269983
Product Specifications
- Other Name: Sensor - Map; Map Sensor; Sensor Map
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269983
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Chrysler Cirrus Submodels:
- LX, LXi | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Chrysler Cirrus MAP Sensor Parts and Q&A

Q: How to Replace a MAP Sensor on 2000 Chrysler Cirrus?
A: To replace the MAP sensor, you need to disconnect the negative battery cable and the electrical connector. Remove the Sensor and Install New Sensor, Make Sure The O-Ring is Intact Tighten up screws to 3.4 Nm, reconnect the electrical connector and reinstall the negative battery cable.