JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Dakota Lash Adjuster
Lash Adjuster Lifter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Lash Adjusters found
2000 Dodge Dakota Valve Lifters Part Number: 53010574AB
$35.15 MSRP: $51.00You Save: $15.85 (32%)Product Specifications- Other Name: Tappet - Valve; Lifter; Tappet Valve
- Replaces: 53010574AA
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010574AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Valve Lifters Part Number: 53021077
$31.67 MSRP: $45.60You Save: $13.93 (31%)Product Specifications- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.9 x 0.9 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021077
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Valve Lifters Part Number: 4713439
Product Specifications- Other Name: Tappet Package - Valve; Engine Valve Lifter; Valve Lifter; Tappet, Valve - Standard; Tappet Package Valve; Tappet, Valve Lifter; Tappet, Valve
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4713439
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Dakota Lash Adjuster Parts and Q&A
- Q: How to Service and Repair a Lash Adjuster and Lifter on 2000 Dodge Dakota?A: Before servicing or fixing the lifter and lash adjuster, keep all parts in place just as you took them out. First, you should remove the cover on top of the engine cylinder head. After that, unscrew the capscrews on each bridge and pivot, followed by one turn each from pivot to bridge and back to pivot, to ensure you do not damage the bridges. Once that's done, pull out the push rods and then work tappet out of the cylinder head through the opens spaces using a Hydraulic Valve Tappet Removal/Installation Tool. You don't have to put engine oil on the tappets when you install them; they will collect oil naturally as the engine runs. Put some Mopar Engine Oil Supplement on a tappet, insert and install it using the Hydraulic Valve Tappet Removal/Installation Tool. After the push rod rods, fit the rocker arms and bridge and pivot assemblies, then loosely tighten the capscrews at each bridge. Alternately tighten the capscrews in each thread, checking each one reached 28 Nm (21 ft. lbs.) before setting on the engine cylinder head cover.
Related 2000 Dodge Dakota Parts
2000 Dodge Dakota Oil Pump
2000 Dodge Dakota Timing Chain
2000 Dodge Dakota Camshaft Plug
2000 Dodge Dakota Crankshaft Pulley
2000 Dodge Dakota Crankshaft Timing Gear
2000 Dodge Dakota Dipstick
2000 Dodge Dakota Dipstick Tube
2000 Dodge Dakota Engine Mount Bracket
2000 Dodge Dakota Oil Pan Gasket
2000 Dodge Dakota Piston
2000 Dodge Dakota Pushrod
2000 Dodge Dakota Timing Belt Tensioner