How to Locate, Remove, and Install a Knock Sensor on 2000 Dodge Grand Caravan?

The front of the cylinder block, near the starter, is the place you will find the knock sensor. Unplug the sensor's connector first and then use a crow foot socket to get the sensor out. The knock sensor should be installed and tightened to 10 Nm (7 ft. lbs.) torque when installing and proper torque should be used, because improper handling can influence its performance and cause issues with spark control. In the end, join the electrical connector to the knock sensor.

OEM 2000 Dodge Grand Caravan Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2000 Dodge Grand Caravan Knock Sensor Part Number: 4686362AB
Product Specifications
- Other Name: Sensor - Knock; Sensor Knock
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686362AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Grand Caravan Submodels:
- Base, EL, ES, EX, LE, SE, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2000 Dodge Grand Caravan Knock Sensor Parts and Q&A

Q: How to Locate, Remove, and Install a Knock Sensor on 2000 Dodge Grand Caravan?
A: The front of the cylinder block, near the starter, is the place you will find the knock sensor. Unplug the sensor's connector first and then use a crow foot socket to get the sensor out. The knock sensor should be installed and tightened to 10 Nm (7 ft. lbs.) torque when installing and proper torque should be used, because improper handling can influence its performance and cause issues with spark control. In the end, join the electrical connector to the knock sensor.