Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2000 Dodge Grand Caravan Oxygen Sensor

Oxygen O2 Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

  • 2000 Dodge Grand Caravan Oxygen Sensor - 4727225AB
    2000 Dodge Grand Caravan Oxygen Sensor Diagram - 4727225AB
    View related parts

    2000 Dodge Grand Caravan Oxygen Sensor Part Number: 4727225AB

    Product Specifications
    • Other Name: Sensor - Oxygen; Sensor Oxygen
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 13.7 x 3.1 x 3.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4727225AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2000 Dodge Grand Caravan Submodels:
    • Base, ES, LE, SE, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
  • 2000 Dodge Grand Caravan Oxygen Sensor - 4686154AB
    2000 Dodge Grand Caravan Oxygen Sensor Diagram - 4686154AB
    View related parts

    2000 Dodge Grand Caravan Oxygen Sensor Part Number: 4686154AB

    Product Specifications
    • Other Name: Sensor - Oxygen; Sensor Oxygen
    • Item Weight: 0.60 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4686154AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2000 Dodge Grand Caravan Submodels:
    • Base, ES, LE, SE, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2000 Dodge Grand Caravan Oxygen Sensor Parts and Q&A

  • Q: How to Replace the Downstream Oxygen Sensor 1/2 on 2000 Dodge Grand Caravan?
    A: Be careful to lift and support the vehicle before removing the Oxygen 1/2 sensor, because the exhaust manifold can be very hot. With the grommet cover taken off, press the locking tab and remove the connector from the oxygen sensor. Use either Snap-On YA8875 or an alternative tool to remove the sensor. Once you've removed the exhaust manifold, use an 18 mm X 1.5 + 6E tap to clean the threads. If you're reusing the sensor, you should coat the threads with Loctite 771-64 or a similar anti-seize compound. Installation of new sensors is easy because their coating already contains the required compound. Affix the sensor, tighten it to 27 Nm (20 ft lbs.), insert the electrical connector, put on the grommet and lower your vehicle back to the floor.

Related 2000 Dodge Grand Caravan Parts

Alternate Year Models

+
1999 Dodge Grand Caravan Oxygen Sensor 2001 Dodge Grand Caravan Oxygen Sensor