How to replace a power window switch on 2000 Dodge Intrepid?

To replace power window switch, open the hood of the car and disconnect the negative battery cable. Then, take out the door trim panel of the driver and the three mounting screws. Remove the switch and de-connect the wire connector. In order to install, undo these steps.

OEM 2000 Dodge Intrepid Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Window Switches found

View related parts
2000 Dodge Intrepid Window Switch, Black, Front Passenger Side Part Number: 56007695AD
$100.22 MSRP: $220.00
You Save: $119.78 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Front Right, Rear
- Position: Front Passenger Side
- Replaces: 5GS20DX9AA, 56007695AB, 56007695AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 2.3 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56007695AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 2.7L V6, 3.2L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Window Switch, Black, Front Driver Side Part Number: 5026004AA
$127.87 MSRP: $177.00
You Save: $49.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Front Left; Switch Power Window; Door Window Switch
- Position: Front Driver Side
- Replaces: 4760191AD, 4760191AC
- Item Weight: 0.80 Pounds
- Item Dimensions: 1.9 x 2.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5026004AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2000 Dodge Intrepid Power Window Switch Parts and Q&A

Q: How to replace a power window switch on 2000 Dodge Intrepid?
A: To replace power window switch, open the hood of the car and disconnect the negative battery cable. Then, take out the door trim panel of the driver and the three mounting screws. Remove the switch and de-connect the wire connector. In order to install, undo these steps.