How to Service and Repair a Cruise Control Servo on 2000 Dodge Neon?

Before servicing or repairing the servo, release the electrical connection and vacuum tube from it. After that, unscrew both nuts that hold the cable to the servo and remove the pin that is clipped onto the cable. You should begin installation by adding a retaining clip to the cable at the servo, then tighten the two nuts on the cable to the servo bracket and servo to 7 Nm (60 ins. lbs.). Now, replace the electrical connector and vacuum hose onto the servo.

OEM 2000 Dodge Neon Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Servo found

View related parts
2000 Dodge Neon Cruise Servo Part Number: 4669979
Product Specifications
- Other Name: Servo - Speed Control; Cruise Control Servo; Actuator; Servo; Servo Speed Control
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.4 x 4.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669979
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2000 Dodge Neon Cruise Control Servo Parts and Q&A

Q: How to Service and Repair a Cruise Control Servo on 2000 Dodge Neon?
A: Before servicing or repairing the servo, release the electrical connection and vacuum tube from it. After that, unscrew both nuts that hold the cable to the servo and remove the pin that is clipped onto the cable. You should begin installation by adding a retaining clip to the cable at the servo, then tighten the two nuts on the cable to the servo bracket and servo to 7 Nm (60 ins. lbs.). Now, replace the electrical connector and vacuum hose onto the servo.