Other Name: Switch - Speed Control; Cruise Control Switch, Right; Engagement Switch; Switch; Switch Speed Control
Position: Passenger Side
Item Weight: 0.50 Pounds
Item Dimensions: 4.1 x 3.0 x 2.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56021332AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
Laramie, SLT, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
2000 Dodge Ram 1500 Cruise Control Switch Parts and Q&A
Q: How to Safely Remove and Install a Cruise Control Switch and Airbag System Component on 2000 Dodge Ram 1500?
A: Never begin work on the air bag system until the battery is removed and its cable(s) disconnected and then allow the system capacitor two minutes to discharge to keep you safe. Before you remove the cruise control switch, start by isolating the negative battery cable(s) and then follow the instructions for removing the air bag module as is done in Restraint Systems. Next, unscrew the mounting screw for the switch and grab the switch before removing the connector at the switch. To install the switch, connect the electrical connector to its terminal, fix the switch with the mounting screws and tighten by hand. After that, install the air bag module once more using the instructions in air bags and Seat Belts/air bags and place the negative battery cable on the chassis after reconnecting it.