Other Name: Clutch - Fan; Engine Cooling Fan Clutch; Clutch; Drive Fan
Item Weight: 3.70 Pounds
Item Dimensions: 7.1 x 7.4 x 6.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52027710AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 8 Cyl 5.9 L GAS
2000 Dodge Ram 1500 Fan Clutch Parts and Q&A
Q: How to Inspect and Repair a Fan Clutch and Fan Blade Assembly on 2000 Dodge Ram 1500?
A: While fixing the fan clutch, first clean the fan blades using soap and water, being sure not to get any of the cleaning mixture into the electric motor of the fan. Check the fan blade assembly very closely, since bending or straightening blades in any other way than recommended is not the right thing to do. Whenever the fan blade is changed due to mechanical reasons, check the water pump and viscous fan drive for damage caused by extra shaking. Start by taking off the whole fan blade assembly from the viscous fan drive unit, using four mechanical bolts. Put the fan down with its leading edge facing toward the floor, so the tip of the blade touches the surface; if the distance between the opposite blade and the floor is greater than 2.0 mm (0.090 inch) or if the blades rock more than 2.0 mm (0.090 inch), replace the fan. Also, make sure the fan assembly does not have any cracks, bends, loose rivets or broken welds, because if it does, the fan should be replaced.