How to service and repair the steering knuckle on 2000 Dodge Ram 1500 Van?

To service the steering knuckle, raise the car and remove the wheel, brake caliper and rotor. Remove the tie rod and remove ball joints with a Ball Joint Remover. Reinstall steering knuckle, dust shield and steering arm, tightening all the nuts to specified torque. Reassemble components and bring the vehicle down.

OEM 2000 Dodge Ram 1500 Van Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2000 Dodge Ram 1500 Van Knuckle, Front Driver Side Part Number: 52038863
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52038863
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Van Knuckle, Front Passenger Side Part Number: 52038862
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 14.00 Pounds
- Item Dimensions: 18.5 x 9.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52038862
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Van Steering Knuckle Parts and Q&A

Q: How to service and repair the steering knuckle on 2000 Dodge Ram 1500 Van?
A: To service the steering knuckle, raise the car and remove the wheel, brake caliper and rotor. Remove the tie rod and remove ball joints with a Ball Joint Remover. Reinstall steering knuckle, dust shield and steering arm, tightening all the nuts to specified torque. Reassemble components and bring the vehicle down.