How is a Vapor Canister Removed and Installed on 2000 Dodge Ram 1500?

Two EVAP cans are mounted in front of the vehicle cab on the right frame rail. To remove them, disconnect the fuel lines, remove the mounting nuts and take off the canisters. For installation, position and tighten the nuts to 9 Nm and reconnect the fuel lines.

OEM 2000 Dodge Ram 1500 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2000 Dodge Ram 1500 Vapor Canister Part Number: 53030837
Product Specifications
- Other Name: Canister - Vapor; Canister, Vacuum; Canister, Vapor; Canister Vapor
- Item Weight: 5.30 Pounds
- Item Dimensions: 5.7 x 8.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030837
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, SS/T 5.9L, ST, Sport, WS | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 1500 Vapor Canister Part Number: 53031584AC
Product Specifications
- Other Name: Canister - Vapor; Canister Fuel Vapor; Canister Vapor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031584AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2000 Dodge Ram 1500 Submodels:
- Laramie, SLT, SRT-10, SS/T 5.9L, ST, Sport, WS | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 1500 Vapor Canister Parts and Q&A

Q: How is a Vapor Canister Removed and Installed on 2000 Dodge Ram 1500?
A: Two EVAP cans are mounted in front of the vehicle cab on the right frame rail. To remove them, disconnect the fuel lines, remove the mounting nuts and take off the canisters. For installation, position and tighten the nuts to 9 Nm and reconnect the fuel lines.