How to Service and Repair a Vapor Canister on Dodge Ram 1500?

When servicing and maintaining the canister for your evaporative emission control, first lift and prop up the vehicle. If needed, remove both the fuel tank skid plate or the transfer case skid plate, since in specific cases, access to the EVAP canister depends on such removal. For this type of canister, remove the electrical wiring connector from the ESIM switch, remove the vapor line from the ESIM switch and remove the quick-connect vapor line from the canister. Slacken the bolt holding the canister mounting bracket under the ESIM switch, then pull the canister away from the bracket while directing its locating pins. The procedure for Type-2 canisters is the same; after disconnecting the vapor line, remove the bolt that holds the canister bracket. The process for Type-3 canisters is the same: remove the electrical wiring connector from the ESIM switch, the vapor line from the ESIM switch and the quick-connect line from the main canister. Grip the main canister and pull it off of the mounting bracket after releasing the canister bolt. For the secondary canister, take out the mounting bolt and direct its locating pins out. Like with other types, start by disconnecting the wiring connector from the ESIM, remove the vapor line from the ESIM and disconnect the quick-connect line from the main canister. Take out the primary canister mounting bracket nut, uninstall the primary canister from the bracket and then guide the secondary canister's pins aside as you take out the second mounting nut.

How to Remove and Install a Vapor Canister on Dodge Ram 1500?

Maintenance-free evaporative emission control canisters are set up within a two-piece support bracket that sits close to the front of the fuel tank. To remove the canisters, first level the car to keep it stable and cut the fuel lines at each canister so you won't have trouble reinstalling them. After that, unscrew the support bracket on the bottom and lift out the mounting nuts on the top of the canisters. Then, carefully take each canister down from the upper support bracket. Place every canister into the upper support bracket, screw them down using the nuts and make sure to follow the provided torque instructions. Put on the lower support bracket making sure to use the suggested torque values and attach the vapor/vacuum lines securely. In addition, check the vapor/vacuum lines at the LDP, LDP filter and EVAP canister purge solenoid for damage or leaks, since a leak can set off a Diagnostic Trouble Code (DTC).

OEM Dodge Ram 1500 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Vapor Canisters found

View related parts
Dodge Ram 1500 Vapor Canister Part Number: 5147158AA
$216.31 MSRP: $327.00
You Save: $110.69 (34%)
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Filter; Canister; Canister Vapor
- Replaces: 4891567AC, 4891567AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 52110232AD
$237.58 MSRP: $359.00
You Save: $121.42 (34%)
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Replaces: 52110232AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Dodge Ram 1500 | Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 4891726AI
$412.17 MSRP: $626.00
You Save: $213.83 (35%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4891726AF, 4891726AH, 4891726AD, 4891726AB, 4891726AG, 4891726AA, 4891726AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Dodge Ram 1500 | Laramie, SLT, SXT | 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 55398669AG
$457.47 MSRP: $694.00
You Save: $236.53 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 55398669AE, 55398669AA, 55398669AD, 55398669AB, 55398669AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 5290428AD
$156.10 MSRP: $238.00
You Save: $81.90 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 5290428AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Dodge Ram 1500 | SRT-10 | 10 Cyl 8.3 L GAS, 8.3L V10
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 4891723AF
$364.65 MSRP: $554.00
You Save: $189.35 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4891723AA, 4891723AC, 4891723AE, 4891723AB, 4891723AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Ram 1500 | Laramie, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Canister - Vapor Part Number: 5147067AJ
$412.20 MSRP: $606.00
You Save: $193.80 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: VAPOR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Canister - Vapor Part Number: 5147075AJ
$239.06 MSRP: $354.00
You Save: $114.94 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: VAPOR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Dodge Ram 1500 | Laramie, SLT, ST, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 53030837
Product Specifications
- Other Name: Canister - Vapor; Canister, Vacuum; Canister, Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Dodge Ram 1500 | Laramie, SLT, SRT-10, SS/T 5.9L, ST, Sport, WS | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 4891799AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Replaces: 4891563AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Ram 1500 | Laramie, SLT | 3.7L V6, 4.7L V8, 5.7L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
- 2004 Dodge Ram 1500 | 3.7L V6, 4.7L V8, 5.7L V8
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 53031584AC
Product Specifications
- Other Name: Canister - Vapor; Canister Fuel Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Dodge Ram 1500 | Laramie, SLT, SRT-10, SS/T 5.9L, ST, Sport, WS | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 4723550
Product Specifications
- Other Name: Canister Package - Vapor; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1995 Dodge Ram 1500 | Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 1500 Vapor Canister Part Number: 53031752AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Ram 1500 | Base, LT, Laramie, SS/T 5.9L, ST, Sport, WS | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

Dodge Ram 1500 Vapor Canister

Choose OEM Vapor Canister that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Vapor Canister follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 1500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 1500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

In Dodge Ram 1500 vehicles, the Vapor Canister is an integral component of the EVAP system which aims at restricting release of hydrocarbon emissions into the atmosphere. This component is sometimes called the carbon, or charcoal canister, wherein fuel vapors from the fuel tank are collected, and held until the engine demands more fuel. When opened, the purge valve lets these vapors to be drawn in together with other fresh air and burned within the engine. There has been the usage of different types of Vapor Canisters on different generations of the Dodge Ram 1500 with more extension for the diagnostic functionalities of contemporary OBD II cars. Some of the upgrades made include integrating a canister vent solenoid whose function is to help supplement alert on leaks in the system and a fuel tank pressure sensor whose role is to assist in determining if the system is working properly or not. The main function of the Vapor Canister remains consistent: as tanks and vessels for storing and handling fuel vapors so as to minimize pollutions of the environment.

Dodge Ram 1500 Vapor Canister Parts and Q&A

Vapor Canister
5147158AA
Q: How to Service and Repair a Vapor Canister on Dodge Ram 1500?
A:
When servicing and maintaining the canister for your evaporative emission control, first lift and prop up the vehicle. If needed, remove both the fuel tank skid plate or the transfer case skid plate, since in specific cases, access to the EVAP canister depends on such removal. For this type of canister, remove the electrical wiring connector from the ESIM switch, remove the vapor line from the ESIM switch and remove the quick-connect vapor line from the canister. Slacken the bolt holding the canister mounting bracket under the ESIM switch, then pull the canister away from the bracket while directing its locating pins. The procedure for Type-2 canisters is the same; after disconnecting the vapor line, remove the bolt that holds the canister bracket. The process for Type-3 canisters is the same: remove the electrical wiring connector from the ESIM switch, the vapor line from the ESIM switch and the quick-connect line from the main canister. Grip the main canister and pull it off of the mounting bracket after releasing the canister bolt. For the secondary canister, take out the mounting bolt and direct its locating pins out. Like with other types, start by disconnecting the wiring connector from the ESIM, remove the vapor line from the ESIM and disconnect the quick-connect line from the main canister. Take out the primary canister mounting bracket nut, uninstall the primary canister from the bracket and then guide the secondary canister's pins aside as you take out the second mounting nut.
Vapor Canister
53030837
Q: How to Remove and Install a Vapor Canister on Dodge Ram 1500?
A:
Maintenance-free evaporative emission control canisters are set up within a two-piece support bracket that sits close to the front of the Fuel Tank. To remove the canisters, first level the car to keep it stable and cut the fuel lines at each canister so you won't have trouble reinstalling them. After that, unscrew the support bracket on the bottom and lift out the mounting nuts on the top of the canisters. Then, carefully take each canister down from the upper support bracket. Place every canister into the upper support bracket, screw them down using the nuts and make sure to follow the provided torque instructions. Put on the lower support bracket making sure to use the suggested torque values and attach the vapor/vacuum lines securely. In addition, check the vapor/vacuum lines at the LDP, LDP filter and EVAP canister purge solenoid for damage or leaks, since a leak can set off a Diagnostic Trouble Code (DTC).