How to Remove and Install the Idle Control Valve on the Throttle Body on 2000 Dodge Ram 2500?

To install the IAC motor in the throttle body, remove the air cleaner assembly, disconnect the electrical connector, and remove the IAC motor. Remove the motor, unscrewing two mounting bolts. For installation, fasten the motor with the bolts at a torque of 7 Nm, reconnect the electrical connector and reinstall the assembly of the air cleaner.

OEM 2000 Dodge Ram 2500 Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Idle Control Valves found

View related parts
2000 Dodge Ram 2500 Idle Speed Control Part Number: 53030657AD
$105.09 MSRP: $155.00
You Save: $49.91 (33%)
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Air Control Valve; Idle Air Control Valve; Idle Control Motor; Idle Speed Control Motor
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030657AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Idle Speed Control Part Number: 53032067AB
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Air Control Valve; Idle Air Control Valve; Idle Control Motor
- Replaces: 53032067AA
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032067AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 8.0L V10

2000 Dodge Ram 2500 Idle Control Valve Parts and Q&A

Q: How to Remove and Install the Idle Control Valve on the Throttle Body on 2000 Dodge Ram 2500?
A: To install the IAC motor in the throttle body, remove the air cleaner assembly, disconnect the electrical connector, and remove the IAC motor. Remove the motor, unscrewing two mounting bolts. For installation, fasten the motor with the bolts at a torque of 7 Nm, reconnect the electrical connector and reinstall the assembly of the air cleaner.