How Can Brake Drum Machining on a Drum Lathe Avoid Taper and Surface Variation on 2000 Dodge Ram 2500 Van?

Brake drums can be machined on a lathe and the initial cutting can go down to 0.12 - 0.20mm to avoid taper, and final cutting can go down to 0.025 to 0.038mm for a smooth finish. Securely mount the drum and use a damper strap to damp the vibration. Change the drum if machining is beyond maximum diameter.

OEM 2000 Dodge Ram 2500 Van Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Drums found

View related parts
2000 Dodge Ram 2500 Van Drum, Rear Part Number: 52009519AC
$137.01 MSRP: $173.68
You Save: $36.67 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Brake; Brake Drum
- Position: Rear
- Item Weight: 36.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52009519AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2000 Dodge Ram 2500 Van Drum, Rear Part Number: 52009541AD
Product Specifications
- Other Name: Drum - Brake; Brake Drum, Rear; Drum Brake; Brake Drum
- Position: Rear
- Replaces: 52009541AB
- Item Weight: 26.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 52009541AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2000 Dodge Ram 2500 Van Brake Drum Parts and Q&A

Q: How Can Brake Drum Machining on a Drum Lathe Avoid Taper and Surface Variation on 2000 Dodge Ram 2500 Van?
A: Brake drums can be machined on a lathe and the initial cutting can go down to 0.12 - 0.20mm to avoid taper, and final cutting can go down to 0.025 to 0.038mm for a smooth finish. Securely mount the drum and use a damper strap to damp the vibration. Change the drum if machining is beyond maximum diameter.