How to Safely Service and Repair a Wiper Switch on 2000 Dodge Ram 2500?

Removing the tilt steering column lever (where installed), loosen the battery negative cable as well as loosen the wiper switch to service them. Unscrew the screws on the multi-function switch by removing the upper and the lower shrouds. Disconnect the wire harness, and reconnect in the same way, screws should be tightened to 2 Nm.

OEM 2000 Dodge Ram 2500 Wiper Switch

Windshield Wiper Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Switch found

View related parts
2000 Dodge Ram 2500 Ignition Switch Part Number: 4728424
Product Specifications
- Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Steering Column Housing; Windshield Washer Switch.; Turn Signal Switch; Multifunction, Wiper, Headlamp Dimmer, Hazard, Signal & Tilt options.
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.7 x 5.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728424
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2000 Dodge Ram 2500 Wiper Switch Parts and Q&A

Q: How to Safely Service and Repair a Wiper Switch on 2000 Dodge Ram 2500?
A: Removing the tilt steering column lever (where installed), loosen the battery negative cable as well as loosen the wiper switch to service them. Unscrew the screws on the multi-function switch by removing the upper and the lower shrouds. Disconnect the wire harness, and reconnect in the same way, screws should be tightened to 2 Nm.