How to Locate, Remove, and Install a Blower Motor Resistor on 2000 Dodge Stratus?

The blower motor resistor is located on the lower right hand side of the heater housing. To remove it, remove the bottom right underpanel silencer/duct, disconnect the wiring connectors and unscrew the holding screws. Pull the resistor out, and for installation do the opposite of these steps.

OEM 2000 Dodge Stratus Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2000 Dodge Stratus Resistor Part Number: 4885845AA
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 4885844AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4885845AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Stratus Submodels:
- Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Dodge Stratus Blower Motor Resistor Parts and Q&A

Q: How to Locate, Remove, and Install a Blower Motor Resistor on 2000 Dodge Stratus?
A: The blower motor resistor is located on the lower right hand side of the heater housing. To remove it, remove the bottom right underpanel silencer/duct, disconnect the wiring connectors and unscrew the holding screws. Pull the resistor out, and for installation do the opposite of these steps.