How to Service a Dimmer Switch on 2000 Dodge Stratus?

To service the dimmer switch, disconnect the negative cable of the battery and remove the upper steering column shroud. Take out the multi-function switch screws, disconnect the wires, and send the switch aloof. For installation, follow the steps in reverse, applying the screws to specified torque values.

OEM 2000 Dodge Stratus Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Dimmer Switches found

View related parts
2000 Dodge Stratus Multifunction Switch Part Number: 4608383
Product Specifications
- Other Name: Switch - Multifunction; Windshield Washer Switch; Multi Purpose Switch; Headlamp Switch; Combination Switch; Wiper Switch; Multifunction Switch W/O Fog Lamp
- Replaces: 4608383AB
- Item Weight: 1.80 Pounds
- Item Dimensions: 15.7 x 6.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4608383
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Stratus Submodels:
- Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Dodge Stratus Multifunction Switch Part Number: 4608382
Product Specifications
- Other Name: Switch - Multifunction; Windshield Washer Switch; Multi Purpose Switch; Headlamp Switch; Combination Switch; Wiper Switch; Multifunction Switch W/O Fog Lamp
- Item Weight: 1.80 Pounds
- Item Dimensions: 16.0 x 7.1 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4608382
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Stratus Submodels:
- Base, ES, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

2000 Dodge Stratus Dimmer Switch Parts and Q&A

Q: How to Service a Dimmer Switch on 2000 Dodge Stratus?
A: To service the dimmer switch, disconnect the negative cable of the battery and remove the upper steering column shroud. Take out the multi-function switch screws, disconnect the wires, and send the switch aloof. For installation, follow the steps in reverse, applying the screws to specified torque values.