JeepParts
My Garage
My Account
Cart
OEM 2000 Dodge Viper Fuel Level Sensor
Gas Gauge Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Fuel Level Sensors found
2000 Dodge Viper Fuel Gauge Sending Unit Part Number: 5017080AA
Product Specifications- Other Name: Level Kit - Fuel; Fuel Level Sensor; Level Sensor; Level Unit Kit Fuel
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.2 x 5.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017080AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Viper Fuel Pump Part Number: 5017074AA
Product Specifications- Other Name: Module Kit - Fuel Pump/Level Unit; Fuel Sending Unit; Module Kit Fuel Pump/Level Unit
- Item Weight: 4.70 Pounds
- Item Dimensions: 16.8 x 11.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017074AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Viper Fuel Gauge Sending Unit Part Number: 5011545AA
Product Specifications- Other Name: Level Kit - Fuel; Fuel Level Sensor; Level Sensor; Level Unit Kit Fuel
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.6 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011545AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2000 Dodge Viper Fuel Level Sensor Parts and Q&A
- Q: How to Service and Repair a Fuel Level Sensor on 2000 Dodge Viper?A: The fuel level sensor service and repair begins by removing the fuel pump module. Following that, press down on the retaining tab to remove the fuel pump/level sensor connector from the lower end of the fuel pump module electrical connector. Pull the locking wedge back first and then pick up a small screwdriver to carefully lift the locking finger away from the terminal and push the terminal out from the connector. Release the level sensor from the pump module by pushing out the signal for the level sensor and the ground, then pushing the tab on the connector down. To start the installation, put the sensor wires into the bottom of the module, then wrap them along the groove in the level sensor at the rear. After feeding the wires, put the level sensor up until it snaps securely into the channel. Gently move the wires from the sensor to the connector such that they go up first, then twist them down until they fit well and signal and ground wires are placed as they should be. After that, place the locking wedge onto the connector, raise the connector into the bottom of the fuel pump module's electrical connector and attach the fuel pump module back in place.
Related 2000 Dodge Viper Parts
2000 Dodge Viper Throttle Body
2000 Dodge Viper Fuel Pump
2000 Dodge Viper Gas Cap
2000 Dodge Viper Accelerator Cable
2000 Dodge Viper Fuel Filler Neck
2000 Dodge Viper Fuel Sending Unit
2000 Dodge Viper Fuel Tank
2000 Dodge Viper Fuel Tank Strap
2000 Dodge Viper Fuel Tank Vent Valve
2000 Dodge Viper Intake Manifold Gasket
2000 Dodge Viper Throttle Body Gasket
2000 Dodge Viper Throttle Cable