How to Service and Repair a Rear Sway Bar Bushing on 2000 Dodge Viper?

In order to replace the rear sway bar bushing, raise up the vehicle and take away the bushing retainers. Unscrew the old bushings, clean the sway bar and fix new bushings. Install the retainers again and attach the sway bar to the frame, screwing bolts to 68 Nm (50 ft. lbs), and then drop the car.

OEM 2000 Dodge Viper Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Bushings found

View related parts
2000 Dodge Viper Stabilizer Bar Bushing, Rear Part Number: 4643004
Product Specifications
- Other Name: Bushing - Stabilizer Bar; Suspension Stabilizer Bar Bushing, Front, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Bushing
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.2 x 1.8 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4643004
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT, GT2, GTC, GTS, R/T-10, SRT, SRT-10, SRT-10 ACR | 10 Cyl 8.0 L GAS, 10 Cyl 8.3 L GAS, 10 Cyl 8.4 L GAS
View related parts
2000 Dodge Viper Stabilizer Bar Bushing Part Number: 4643031
Product Specifications
- Other Name: Bushing - Sway Bar; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar; Bushing, Rear Sway Bar; Bushing, Sway Bar
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.0 x 1.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4643031
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Viper Submodels:
- ACR, Base, GT2, GTS, R/T-10 | 10 Cyl 8.0 L GAS

2000 Dodge Viper Sway Bar Bushing Parts and Q&A

Q: How to Service and Repair a Rear Sway Bar Bushing on 2000 Dodge Viper?
A: In order to replace the rear sway bar bushing, raise up the vehicle and take away the bushing retainers. Unscrew the old bushings, clean the sway bar and fix new bushings. Install the retainers again and attach the sway bar to the frame, screwing bolts to 68 Nm (50 ft. lbs), and then drop the car.