How to Service a Cooling Fan Assembly on 2000 Jeep Cherokee?

To service the electric cooling fan module, disconnect the battery negative cable, and remove the CRS hose. Remove the power steering reservoir and then the viscous fan assembly and the fan electrical connector. Install the new fan module, assemble parts back and re-connect the battery cable.

OEM 2000 Jeep Cherokee Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Cooling Fan Assemblys found

View related parts
2000 Jeep Cherokee Fan Blade Part Number: 52028337AC
Product Specifications
- Other Name: Fan - Radiator Cooling; Dual Radiator and Condenser Assembly; Engine Cooling Fan.; Fan Assembly; Fan Motor Assembly
- Item Weight: 5.90 Pounds
- Item Dimensions: 17.3 x 16.3 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52028337AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Fan Clutch Part Number: 52002593
Product Specifications
- Other Name: Fan; Engine Cooling Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly; Fan Blade; Fan, Mechanical (Electric Serviced In #43)
- Item Weight: 3.30 Pounds
- Item Dimensions: 16.4 x 16.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52002593
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport | 4 Cyl 2.1 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2000 Jeep Cherokee Cooling Fan Assembly Parts and Q&A

Q: How to Service a Cooling Fan Assembly on 2000 Jeep Cherokee?
A: To service the electric cooling fan module, disconnect the battery negative cable, and remove the CRS hose. Remove the power steering reservoir and then the viscous fan assembly and the fan electrical connector. Install the new fan module, assemble parts back and re-connect the battery cable.