How to Service and Repair a Pilot Bearing on 2000 Jeep Cherokee?

To service pilot bearing, loosen up the transmission, clutch cover and disc. Draw out the bearing using a blind hole puller. Wipe the bore, grease the new bearing and install it with the seal outward. Install a transmission after by using a clutch alignment tool to fit it.

OEM 2000 Jeep Cherokee Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pilot Bearings found

View related parts
2000 Jeep Cherokee Pilot Bearing Part Number: 53009180AB
$32.31 MSRP: $42.00
You Save: $9.69 (24%)
ADD TO CART
Product Specifications
- Other Name: Sleeve - Pilot; Multi-Purpose Bearing; Needle Bearing; Pilot Bearings; Bearing Pilot For 2.5 Engine, Serviced In Flywheel; Bearing Pilot Manual Transmission; Bearing Pilot
- Replaces: 53009180
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53009180AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Classic, Country, Limited, SE, Sport | 6 Cyl 4.0 L GAS
View related parts
2000 Jeep Cherokee Pilot Bearing Part Number: J3250005
$12.30 MSRP: $15.60
You Save: $3.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Pilot; Bearing, Pilot, Manual Transmission; Bearing Pilot
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.1 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: J3250005
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Cherokee Submodels:
- Base, SE | 4 Cyl 2.5 L GAS

2000 Jeep Cherokee Pilot Bearing Parts and Q&A

Q: How to Service and Repair a Pilot Bearing on 2000 Jeep Cherokee?
A: To service pilot bearing, loosen up the transmission, clutch cover and disc. Draw out the bearing using a blind hole puller. Wipe the bore, grease the new bearing and install it with the seal outward. Install a transmission after by using a clutch alignment tool to fit it.