How to Maintain an Antenna for Optimal Performance on 2000 Jeep Grand Cherokee?

To maintain the radio antenna, disconnect the battery negative cable, shelve plate and trim panel and disconnect the antenna coaxial cable. To install the new antenna, remove the antenna base and the lead, and re-install the new antenna. Proceed on the instrument panel antenna cable, making sure all elements have been put back in their places.

OEM 2000 Jeep Grand Cherokee Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antennas found

View related parts
2000 Jeep Grand Cherokee Antenna Mast, Black bright Stainless Part Number: 4685574
$18.21 MSRP: $26.20
You Save: $7.99 (31%)
ADD TO CART
Product Specifications
- Other Name: Mast - Antenna; Radio Antenna Mast; Antenna Assembly; Mast; Mast Antenna Black
- Item Weight: 1.50 Pounds
- Item Dimensions: 49.4 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685574
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2000 Jeep Grand Cherokee Antenna Base Part Number: 56038412AB
Product Specifications
- Other Name: Base - Antenna; Radio Antenna Base; Base; Base Antenna
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.2 x 7.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56038412AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2000 Jeep Grand Cherokee Antenna Parts and Q&A

Q: How to Maintain an Antenna for Optimal Performance on 2000 Jeep Grand Cherokee?
A: To maintain the radio antenna, disconnect the battery negative cable, shelve plate and trim panel and disconnect the antenna coaxial cable. To install the new antenna, remove the antenna base and the lead, and re-install the new antenna. Proceed on the instrument panel antenna cable, making sure all elements have been put back in their places.