How to Replace a CV Boot on the Inner Constant Velocity Joint on 2001 Chrysler Concorde?

To replace the inner constant velocity joint boot, remove the halfshaft assembly, remove the clamps and slide off the boot. Remove the spider joint while holding the rollers and clean and inspect components. Install new boot, grease and reassemble, making sure to seal it properly before re-installing halfshaft.

OEM 2001 Chrysler Concorde CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 CV Boots found

View related parts
2001 Chrysler Concorde Boot Kit Part Number: 4863722
Product Specifications
- Other Name: Boot - Half Shaft; CV Boot; Outer Boot; Boots; Boot Kit Half Shaft Outer
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.4 x 6.4 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4863722
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Chrysler Concorde Inner Boot Part Number: 4728261
Product Specifications
- Other Name: Boot - Halfshaft; CV Boot; Boot Kit Half Shaft Inner; Boot Package, Inner C.V.
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.5 x 6.4 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4728261
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2001 Chrysler Concorde CV Boot Parts and Q&A

Q: How to Replace a CV Boot on the Inner Constant Velocity Joint on 2001 Chrysler Concorde?
A: To replace the inner constant velocity joint boot, remove the halfshaft assembly, remove the clamps and slide off the boot. Remove the spider joint while holding the rollers and clean and inspect components. Install new boot, grease and reassemble, making sure to seal it properly before re-installing halfshaft.