How to Diagnose and Fix a Throttle Position Sensor on 2001 Chrysler Concorde?

In order to fix Throttle Position Sensor (TPS), first of all, unplug the negative battery cable, disconnect the TPS and make sure that it fits well into the throttle shaft. Tighten the screws to 5.1 Nm (45 in. lbs.), verify position of throttle plate, and reconnect the electrical connector and then re-attach battery cable.

OEM 2001 Chrysler Concorde Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

View related parts
2001 Chrysler Concorde Throttle Position Sensor Part Number: 68405580AA
$93.36 MSRP: $208.00
You Save: $114.64 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68405580AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Concorde Submodels:
- LXi, Limited | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Chrysler Concorde Throttle Position Sensor Part Number: 4897247AA
$79.83 MSRP: $101.20
You Save: $21.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Idle Control Motor; Idle Speed Control; Sensor Kit Throttle Position
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 3.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897247AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Concorde Submodels:
- LX | 6 Cyl 2.7 L GAS

2001 Chrysler Concorde Throttle Position Sensor Parts and Q&A

Q: How to Diagnose and Fix a Throttle Position Sensor on 2001 Chrysler Concorde?
A: In order to fix Throttle Position Sensor (TPS), first of all, unplug the negative battery cable, disconnect the TPS and make sure that it fits well into the throttle shaft. Tighten the screws to 5.1 Nm (45 in. lbs.), verify position of throttle plate, and reconnect the electrical connector and then re-attach battery cable.