How to Service and Repair a Camshaft Seal on 2001 Chrysler PT Cruiser?

Before servicing the camshaft oil seal, take the timing belt off. Before removing the center bolt, use Special Tool 6847 to keep the camshaft sprocket in place. After that, remove the rear timing belt cover and carefully use Special Tool C-4679-A to take out the camshaft seal without damaging the surface or bore. Clean the surfaces that go together and use 400 grit paper to polish them if you notice varnish, dirt or nicks. Slide each camshaft seal into a cylinder head using Special Tool MD-998306 until they are even with the surface of the head. Insert the rear timing belt cover and ensure you do not use an impact wrench to tighten the camshaft sprocket bolts. Secure both sprockets in place using Special Tool 6847 and then tighten the center bolt up to 101 Nm (75 ft. lbs.). Make sure to set the timing belt into position in the last step.

OEM 2001 Chrysler PT Cruiser Camshaft Seal

Cam Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Seals found

View related parts
2001 Chrysler PT Cruiser Rear Seal Part Number: 4884111AA
$8.27 MSRP: $12.35
You Save: $4.08 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Camshaft Sensor; Engine Camshaft Position Sensor O-Ring; Engine Crankshaft Position Sensor Seal; Camshaft Seal; Camshaft Sensor Seal; Seal Camshaft Sensor; Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.7 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884111AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2001 Chrysler PT Cruiser Oil Seal Part Number: 4777086
$10.73 MSRP: $15.95
You Save: $5.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Camshaft; Engine Camshaft Seal; Camshaft Seal; Front Seal; Camshaft Front Oil, Order 5016733Aa Per Tsb 09-008-00.
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 2.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4777086
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2001 Chrysler PT Cruiser Camshaft Seal Parts and Q&A

Q: How to Service and Repair a Camshaft Seal on 2001 Chrysler PT Cruiser?
A: Before servicing the camshaft oil seal, take the timing belt off. Before removing the center bolt, use Special Tool 6847 to keep the camshaft sprocket in place. After that, remove the rear timing belt cover and carefully use Special Tool C-4679-A to take out the camshaft seal without damaging the surface or bore. Clean the surfaces that go together and use 400 grit paper to polish them if you notice varnish, dirt or nicks. Slide each camshaft seal into a cylinder head using Special Tool MD-998306 until they are even with the surface of the head. Insert the rear timing belt cover and ensure you do not use an impact wrench to tighten the camshaft sprocket bolts. Secure both sprockets in place using Special Tool 6847 and then tighten the center bolt up to 101 Nm (75 ft. lbs.). Make sure to set the timing belt into position in the last step.