What is the Role of a Neutral Safety Switch in Servicing the Transmission Range Sensor on 2001 Chrysler Sebring?

Before you can work on the sensor, first remove the valve body assembly from the transaxle. Next, remove the screw holding the sensor to the valve body and take out the sensor. Release the TRS from the shaft in the field camera manual. To install, place the TRS (transmission range sensor) on the valve body and tighten the retaining screw to 5 Nm (45 inch lbs.). When you're done, remount the valve body onto the transaxle.

OEM 2001 Chrysler Sebring Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2001 Chrysler Sebring Neutral Safety Switch Part Number: 4659676AC
$62.61 MSRP: $93.90
You Save: $31.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Parking Brake Warning Switch; Sensor Transmission Range
- Replaced by: 4659676AD
- Replaces: 4659676AB, 4659676
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4659676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2001 Chrysler Sebring Neutral Safety Switch Parts and Q&A

Q: What is the Role of a Neutral Safety Switch in Servicing the Transmission Range Sensor on 2001 Chrysler Sebring?
A: Before you can work on the sensor, first remove the valve body assembly from the transaxle. Next, remove the screw holding the sensor to the valve body and take out the sensor. Release the TRS from the shaft in the field camera manual. To install, place the TRS (transmission range sensor) on the valve body and tighten the retaining screw to 5 Nm (45 inch lbs.). When you're done, remount the valve body onto the transaxle.