What is the Role of the Neutral Safety Switch in Servicing the Transmission Range Sensor on 2002 Chrysler Sebring?

The first step to servicing the transmission range sensor is to take apart the valve body from the transaxle. Lift the retaining screw of the transmission range sensor and remove the sensor from the valve body. Take the TRS out of the bottom of the manual shaft. When installing, set the TRS on the valve body and tighten the retaining screw to 5 Nm (45 in. lbs.). After that, place the valve body back into its position in the transaxle.

OEM 2002 Chrysler Sebring Neutral Safety Switch

Transmission Neutral Safety Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Neutral Safety Switch found

View related parts
2002 Chrysler Sebring Neutral Safety Switch Part Number: 4659676AC
$62.61 MSRP: $93.90
You Save: $31.29 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Transmission Range; Range Sensor; Parking Brake Warning Switch; Sensor Transmission Range
- Replaced by: 4659676AD
- Replaces: 4659676AB, 4659676
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.2 x 4.0 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4659676AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2002 Chrysler Sebring Neutral Safety Switch Parts and Q&A

Q: What is the Role of the Neutral Safety Switch in Servicing the Transmission Range Sensor on 2002 Chrysler Sebring?
A: The first step to servicing the transmission range sensor is to take apart the valve body from the transaxle. Lift the retaining screw of the transmission range sensor and remove the sensor from the valve body. Take the TRS out of the bottom of the manual shaft. When installing, set the TRS on the valve body and tighten the retaining screw to 5 Nm (45 in. lbs.). After that, place the valve body back into its position in the transaxle.