How to Service and Repair the ABS Control Module on 2001 Chrysler Town & Country?

Before you do any work on the Controller Antilock Brake, you should disconnect the batteries, then remove the battery from the car. After that, pull the vacuum hose from the battery tray tank and remove the screw that fixes the coolant filler neck to the battery tray. After that, take out the battery tray. Unlock the CAB connector lock, detach the 24-way electrical connector and the pump/motor connector and then unscrew everything that is holding the CAB to your vehicle. To attach the CAB, put in the screws, tighten them each to 2 Nm (17 in lbs) and then link up the 24-way electrical and pump/motor cables. Put the battery tray in place and fasten the screw on the coolant filler neck, link the vacuum hose back to the tank and place the battery in its holder. At the end, put back the battery cables and use a DRB III to start up the system.

OEM 2001 Chrysler Town & Country ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2001 Chrysler Town & Country Modulator Valve Part Number: 5018252AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 5.10 Pounds
- Item Dimensions: 7.3 x 7.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018252AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chrysler Town & Country Control Module Part Number: 5093988AA
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; Electronic Control; Module Anti-Lock Brakes With Mounting Screws; Module Anti-Lock Brakes
- Replaces: 5086175AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 5.8 x 4.4 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093988AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chrysler Town & Country Control Module Part Number: 5093986AA
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; Electronic Control; Module Anti-Lock Brakes With Mounting Screws; Module Anti-Lock Brakes
- Replaces: 5086174AA
- Item Weight: 2.00 Pounds
- Item Dimensions: 5.8 x 4.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093986AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chrysler Town & Country Modulator Valve Part Number: 5018253AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 6.20 Pounds
- Item Dimensions: 7.3 x 7.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018253AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2001 Chrysler Town & Country ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module on 2001 Chrysler Town & Country?
A: Before you do any work on the Controller Antilock Brake, you should disconnect the batteries, then remove the battery from the car. After that, pull the vacuum hose from the battery tray tank and remove the screw that fixes the coolant filler neck to the battery tray. After that, take out the battery tray. Unlock the CAB connector lock, detach the 24-way electrical connector and the pump/motor connector and then unscrew everything that is holding the CAB to your vehicle. To attach the CAB, put in the screws, tighten them each to 2 Nm (17 in lbs) and then link up the 24-way electrical and pump/motor cables. Put the battery tray in place and fasten the screw on the coolant filler neck, link the vacuum hose back to the tank and place the battery in its holder. At the end, put back the battery cables and use a DRB III to start up the system.