How to Service the Air Bag Control Module for Side Impact on 2001 Chrysler Town & Country?

Remove and separate the negative terminal of your battery from the rest of the equipment before starting working on the Side Impact air bag Control Module. Slide the B-pillar trim off of the vehicle from the side that needs replacement. Then, unscrew the three Siacm retaining screws, pull out the module from the car and separate it from the electrical connector. Installation requires connecting the Siacm connector and inserting the module in the correct B-pillar slot, secured by the three screws, tightened to 5.7 - 7.9 Nm. Then, place the trim covering the B-pillar below back on the right or left side, depending on your model. Pay attention not to form a connection to the battery negative terminal until you have determined the air bag's condition and checked its testing.

OEM 2001 Chrysler Town & Country Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2001 Chrysler Town & Country Control Module Part Number: 4686748AG
Product Specifications
- Other Name: Module - Side Air Bag Control; Air Bag Control Module; Side Impact Inflator Module
- Replaces: 4686748AD, 4686748AF, 4686748AE
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686748AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2001 Chrysler Town & Country Diagnostic Module Part Number: 4686602AJ
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Passenger Presence Module; Occupant Module; Module Air Bag Control
- Replaces: 4686602AH, 4686602AG, 4686602AE, 4686602AI, 4686602AD, 4686602AF
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.1 x 5.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686602AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2001 Chrysler Town & Country Air Bag Control Module Parts and Q&A

Q: How to Service the Air Bag Control Module for Side Impact on 2001 Chrysler Town & Country?
A: Remove and separate the negative terminal of your battery from the rest of the equipment before starting working on the Side Impact air bag Control Module. Slide the B-pillar trim off of the vehicle from the side that needs replacement. Then, unscrew the three Siacm retaining screws, pull out the module from the car and separate it from the electrical connector. Installation requires connecting the Siacm connector and inserting the module in the correct B-pillar slot, secured by the three screws, tightened to 5.7 - 7.9 Nm. Then, place the trim covering the B-pillar below back on the right or left side, depending on your model. Pay attention not to form a connection to the battery negative terminal until you have determined the air bag's condition and checked its testing.