How to Service a Knock Sensor on 2001 Chrysler Town & Country?

To service the knock sensor, disconnect the negative battery cable and raise the vehicle. For All Wheel Drive, remove the PTU. Disconnect the knock sensor's electrical connector and use a crow foot socket to remove it. Install the new sensor, tighten to 10 Nm, reconnect, and lower the vehicle.

OEM 2001 Chrysler Town & Country Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2001 Chrysler Town & Country Knock Sensor Part Number: 4686362AB
Product Specifications
- Other Name: Sensor - Knock; Sensor Knock
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686362AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2001 Chrysler Town & Country Knock Sensor Parts and Q&A

Q: How to Service a Knock Sensor on 2001 Chrysler Town & Country?
A: To service the knock sensor, disconnect the negative battery cable and raise the vehicle. For All Wheel Drive, remove the PTU. Disconnect the knock sensor's electrical connector and use a crow foot socket to remove it. Install the new sensor, tighten to 10 Nm, reconnect, and lower the vehicle.