How to Service the MAP Sensor on 2000 Dodge Caravan?

When servicing the Manifold Pressure/Vacuum Sensor it is recommended that the electrical connector and the vacuum hose be removed off the MAP sensor. Then, unscrew the two clamps that make attachment of the sensor to the intake manifold. Installation requires the sensor to be placed and sealed using the two screws which should be tightened. Lastly, plug back the electrical connector and the vacuum hose into the MAP sensor.

OEM 2000 Dodge Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2000 Dodge Caravan M.A.P. Sensor Part Number: 4686485
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Map Sensor, (Use Insul. 4368173, 4504260); 2.5L Engine (Bracket 5234278); 3.0 Engine Sensor.
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.1 x 6.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686485
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Caravan Submodels:
- Base, C/V, ES, LE, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Dodge Caravan M.A.P. Sensor Part Number: 5269983
Product Specifications
- Other Name: Sensor - Map; Map Sensor; Sensor Map
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.1 x 1.6 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5269983
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Caravan Submodels:
- Base, ES, LE, SE, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2000 Dodge Caravan MAP Sensor Parts and Q&A

Q: How to Service the MAP Sensor on 2000 Dodge Caravan?
A: When servicing the Manifold Pressure/Vacuum Sensor it is recommended that the electrical connector and the vacuum hose be removed off the MAP sensor. Then, unscrew the two clamps that make attachment of the sensor to the intake manifold. Installation requires the sensor to be placed and sealed using the two screws which should be tightened. Lastly, plug back the electrical connector and the vacuum hose into the MAP sensor.