Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Spring Front Bushing; Bushings; Arm, Front Lower Control (LCA) , Right; Bushing Pivot
Item Weight: 1.20 Pounds
Item Dimensions: 2.9 x 1.9 x 1.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4684120
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Grand Caravan Submodels:
Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing Pivot
Item Weight: 0.80 Pounds
Item Dimensions: 2.7 x 2.6 x 2.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4743556AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Grand Caravan Submodels:
Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
Other Name: Bushing - Pivot; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing Lower Control Arm; Bushing Pivot
Item Weight: 0.90 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 4743095AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2001 Dodge Grand Caravan Submodels:
Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
2001 Dodge Grand Caravan Control Arm Bushing Parts and Q&A
Q: How to Maintain and Fix a Control Arm Bushing on 2001 Dodge Grand Caravan?
A: To repair the lower control arm rear bushing, remove the arm and use a vise. For standard bushings, split them lengthwise. For hydro bushings, use Special Tool 8460 to remove and install them, applying Mopar Silicone Spray Lube. Tighten to 50 Nm (37 ft. lbs.) before reinstalling the arm.