How to Maintain and Fix a Control Arm Bushing on Dodge Grand Caravan?

To repair the lower control arm rear bushing, you should remove it from the front suspension cradle and secure it in a vise so that you don't damage it. For basic bushings, take a sharp knife and divide the bushing down the middle to remove it from the lower control arm. When replacing hydro bushings, pull out the lower control arm, fix Special Tool 8460 on the hydro-bushing so the Removal Pin, Special Tool 8460-3, comes through the back hole and tighten the Bridge, Special Tool 8460-1, step. To make standard bushings easier to install, use Mopar Silicone Spray Lube inside the hole of the lower control arm rear bushing, slide the bushing until it seats firmly over the upset at the end and then hold the lower control arm firmly in a vice. For hydro bushings, hold the lower control arm in a vise, position the master spline on the bushing inner sleeve at the bottom control arm rear bushing stem and fit the bushing by hand. Place Installer Cup on the bushing and put Bridge over it, then slide Insert, Special Tool 8460-3, through the flange on the lower control arm and slip Bridge inside it. Place a wedge, Special Tool 8460-4, between the flange and the bushing inner sleeve as it comes close to the flange, then screw in the bushing against the wedge, tightening the bridge forcing screw with a torque wrench to 50 Nm (37 ft. lbs.). Don't force it any more, push back the forcing screw, remove the tool and set the new lower control arm into place.

How to Disassemble and Repair a Control Arm Bushing on Dodge Grand Caravan?

Remove the lower control arm from the front suspension cradle before you service and repair the rear bushing of the control arm. After that, use a vise to hold the lower control arm, but just apply moderate clamping force. Glide a shard razor down the center of the bushing and due to this, you can remove the bushing from the lower control arm with ease. After that, take the bushing out of the lower control arm.

OEM Dodge Grand Caravan Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Control Arm Bushings found

View related parts
Dodge Grand Caravan Lower Control Arm Bushing Part Number: 4684120
$13.54 MSRP: $24.00
You Save: $10.46 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Spring Front Bushing; Bushings; Arm, Front Lower Control (LCA) , Right; Bushing Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Lower Control Arm Bushing Part Number: 4743556AA
$24.46 MSRP: $37.90
You Save: $13.44 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Pivot; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L CNG, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Control Arm Bushing Part Number: 5272084
$7.36 MSRP: $9.34
You Save: $1.98 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Front Suspension Control Arm Pivot; Suspension Control Arm Bushing Kit; Axle Pivot Bushing.; Lower Control Arm Bushing; Front Control Arm and Crossmember Bushings.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Grand Caravan | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Control Arm Bushing Part Number: 5272098
Product Specifications
- Other Name: Bushing - Front Suspension Control Arm Pivot - Rear; Suspension Control Arm Bushing Kit.; Lower Control Arm Bushing; Rear Bushing for Standard Suspension.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Dodge Grand Caravan | Base, ES, LE, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Dodge Grand Caravan Lower Control Arm Rear Bushing Part Number: 4743095AA
Product Specifications
- Other Name: Bushing - Pivot; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing Lower Control Arm; Bushing Pivot
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Dodge Grand Caravan | Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Dodge Grand Caravan Control Arm Bushing

Choose OEM Control Arm Bushing that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Control Arm Bushing follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This Dodge Grand Caravan Control Arm Bushing is one of the control arms in the suspension system in any Grand Caravan, and it is famous for its high reliability and effectiveness. Located in between the control arm and the car's structure, the Control Arm Bushing is a kind of joint that helps to absorb and dampen shocks and reduce any levels of friction. The design of this feature enables the two control arms to smoothly acclimatize to the road element and the steering inputs, making it efficient and safe. For the Dodge Grand Caravan model manufactured between 1984 and 2020, high-quality Control Arm Bushings are ideal since they are available in rubber, steel, and polyurethane materials with each exhibiting different features in relation to its durability. Some of these could include; timing belt, water pump, valve cover gasket, control arm bushings, struts, shocks and other suspension system parts Depending on the degree of wear, left unattended damed Control Arm Bushings may cause several problems with the wheel assembly of the vehicle. Comfort for passengers and cargo capacities are the key aspects of construction of the Dodge Grand Caravan; therefore, it will comfortably accommodate families. Notably, its safety characteristics are also deserving of praise and add to the significance of such a part as the Control Arm Bushing, which ensures the car's stability and maneuverability. Being a minivan with peculiar seating arrangement and rather large interior, the Dodge Grand Caravan is rather special within the framework of car market, and the Control Arm Bushing helps it maintain its unchanging tradition of providing comfortable and secure ride.

Dodge Grand Caravan Control Arm Bushing Parts and Q&A

Lower Control Arm Bushing
4743556AA
Q: How to Maintain and Fix a Control Arm Bushing on Dodge Grand Caravan?
A:
To repair the lower Control Arm rear bushing, you should remove it from the front suspension cradle and secure it in a vise so that you don't damage it. For basic bushings, take a sharp knife and divide the bushing down the middle to remove it from the lower control arm. When replacing hydro bushings, pull out the lower control arm, fix Special Tool 8460 on the hydro-bushing so the Removal Pin, Special Tool 8460-3, comes through the back hole and tighten the Bridge, Special Tool 8460-1, step. To make standard bushings easier to install, use Mopar Silicone Spray Lube inside the hole of the lower control arm rear bushing, slide the bushing until it seats firmly over the upset at the end and then hold the lower control arm firmly in a vice. For hydro bushings, hold the lower control arm in a vise, position the master spline on the bushing inner sleeve at the bottom control arm rear bushing stem and fit the bushing by hand. Place Installer Cup on the bushing and put Bridge over it, then slide Insert, Special Tool 8460-3, through the flange on the lower control arm and slip Bridge inside it. Place a wedge, Special Tool 8460-4, between the flange and the bushing inner sleeve as it comes close to the flange, then screw in the bushing against the wedge, tightening the bridge forcing screw with a torque wrench to 50 Nm (37 ft. lbs.). Don't force it any more, push back the forcing screw, remove the tool and set the new lower control arm into place.
Lower Control Arm Bushing
4684120
Q: How to Disassemble and Repair a Control Arm Bushing on Dodge Grand Caravan?
A:
Remove the lower Control Arm from the front suspension cradle before you service and repair the rear bushing of the control arm. After that, use a vise to hold the lower control arm, but just apply moderate clamping force. Glide a shard razor down the center of the bushing and due to this, you can remove the bushing from the lower control arm with ease. After that, take the bushing out of the lower control arm.