How to Locate, Remove, and Install a Knock Sensor on 2001 Dodge Intrepid?

The knock sensor, located below the intake manifold in the cylinder block, requires the intake manifold plenum and passenger side cylinder head to be removed for replacement. After disconnecting the electrical connector and using a crows foot socket, install the new sensor, tightening it to 10 Nm (7 ft. lbs.) before reassembly.

OEM 2001 Dodge Intrepid Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2001 Dodge Intrepid Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 3.2L V6, 3.5L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2001 Dodge Intrepid Knock Sensor Part Number: 4557667AB
Product Specifications
- Other Name: Sensor - Detonation; Sensor Detonation
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4557667AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2001 Dodge Intrepid Knock Sensor Parts and Q&A

Q: How to Locate, Remove, and Install a Knock Sensor on 2001 Dodge Intrepid?
A: The knock sensor, located below the intake manifold in the cylinder block, requires the intake manifold plenum and passenger side cylinder head to be removed for replacement. After disconnecting the electrical connector and using a crows foot socket, install the new sensor, tightening it to 10 Nm (7 ft. lbs.) before reassembly.