How to Remove and Install a Knock Sensor in an Engine on 2000 Dodge Intrepid?

The one knock sensor for the engine is placed in the cylinder block at the same level as the intake manifold. The first step is to take off the intake manifold plenum; only after that should you remove the passenger side cylinder head. After that, remove the electrical connector from the knock sensor and take out the sensor using a crows foot socket. First, fix the knock sensor and tighten it down to 10 Nm (7 ft. lbs), because poor installation can slow down the knock sensor and possibly cause problems with spark control. After you have secured the sensor, reinstall the passenger side cylinder head, plug the electrical connector into the knock sensor and then set in the intake manifold plenum.

OEM 2000 Dodge Intrepid Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2000 Dodge Intrepid Knock Sensor Part Number: 4606093AD
$103.54 MSRP: $157.00
You Save: $53.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Detonation; Ignition Knock (Detonation) Sensor; Sensor; Sensor Detonation
- Replaces: 4606093
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 2.7 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606093AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 3.2L V6, 3.5L V6, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2000 Dodge Intrepid Knock Sensor Part Number: 4557667AB
Product Specifications
- Other Name: Sensor - Detonation; Sensor Detonation
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4557667AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2000 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2000 Dodge Intrepid Knock Sensor Parts and Q&A

Q: How to Remove and Install a Knock Sensor in an Engine on 2000 Dodge Intrepid?
A: The one knock sensor for the engine is placed in the cylinder block at the same level as the intake manifold. The first step is to take off the intake manifold plenum; only after that should you remove the passenger side cylinder head. After that, remove the electrical connector from the knock sensor and take out the sensor using a crows foot socket. First, fix the knock sensor and tighten it down to 10 Nm (7 ft. lbs), because poor installation can slow down the knock sensor and possibly cause problems with spark control. After you have secured the sensor, reinstall the passenger side cylinder head, plug the electrical connector into the knock sensor and then set in the intake manifold plenum.