Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Dodge Ram 1500 Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

  • 2001 Dodge Ram 1500 Crankshaft Seal - 4778228
    2001 Dodge Ram 1500 Crankshaft Seal - 4778228
    2001 Dodge Ram 1500 Crankshaft Seal Diagram - 4778228
    View related parts

    2001 Dodge Ram 1500 Rear Main Seal Part Number: 4778228

    Product Specifications
    • Other Name: Seal Package - Crankshaft; Engine Crankshaft Seal, Rear; Oil Seal Package, Crankshaft; Seal Package Crankshaft; Oil Seal, Crankshaft; Engine Crankshaft Seal; Crankshaft Seal
    • Position: Rear
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 0.4 x 3.5 x 6.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4778228
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Dodge Ram 1500 Submodels:
    • Base, LT, Laramie, ST, Sport, WS | 6 Cyl 3.9 L GAS
  • 2001 Dodge Ram 1500 Crankshaft Seal - 4798216AC
    2001 Dodge Ram 1500 Crankshaft Seal Diagram - 4798216AC
    View related parts

    2001 Dodge Ram 1500 Rear Main Seal Part Number: 4798216AC

    Product Specifications
    • Other Name: Seal Package - Crankshaft; Engine Crankshaft Seal, Rear; Seal Package Crankshaft; Engine Crankshaft Seal; Crankshaft Seal
    • Position: Rear
    • Replaces: 4798216AB
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 0.8 x 2.0 x 3.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4798216AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2001 Dodge Ram 1500 Submodels:
    • Base, LT, Laramie, SLT, SS/T 5.9L, ST, Sport | 5.9L V8, 8 Cyl 5.9 L GAS

2001 Dodge Ram 1500 Crankshaft Seal Parts and Q&A

  • Q: Can You Replace the Crankshaft Seal Without Removing the Timing Chain Cover on 2001 Dodge Ram 1500?
    A: Take off the negative cable from the battery and then remove the vibration damper to complete the front crankshaft seal replacement without touching the timing chain cover. Check the oil seal to the crankshaft using the seal installation and alignment tool. It should go on smoothly and, if it's a problem, the cover must be properly aligned and installed once more. Gently extract the oil seal from the outside using a proper prying tool, so that the seal bore inside the cover remains clean and intact. The right way to install is to slide the smaller part of the oil seal over Front Oil Seal Installation Tool 6635. After placing the seal and tool on the crankshaft, tighten the vibration damper bolt to pull the seal into place. After that, take out the vibration damper's bolt and seal installation tool, inspect the seal flange on the vibration damper, reinstall the vibration damper and finally link the negative cable to the battery.

Related 2001 Dodge Ram 1500 Parts

Alternate Year Models

+
2000 Dodge Ram 1500 Crankshaft Seal 2002 Dodge Ram 1500 Crankshaft Seal