How to replace the Intake Manifold Temperature Sensor on 2001 Dodge Ram 1500 Van?

An Intake Manifold Temperature (IMT) sensor can be found in the front/side of the intake manifold. For vehicles with this included, begin by unhooking the negative battery cable at your battery. After that, take off the engine cover and the air cleaner housing. Remove the electrical connector at the sensor and, with it disconnected, remove the sensor from the intake manifold. After installation, set the torque for the sensor back on the intake manifold at 28 Nm or 20 ft. lbs. Connect the electrical connector to the sensor, then install the engine cover and the air cleaner housing. Finally, attach the negative battery cable to the battery.

OEM 2001 Dodge Ram 1500 Van Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Intake Manifold Temperature Sensor found

View related parts
2001 Dodge Ram 1500 Van Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 1500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2001 Dodge Ram 1500 Van Intake Manifold Temperature Sensor Parts and Q&A

Q: How to replace the Intake Manifold Temperature Sensor on 2001 Dodge Ram 1500 Van?
A: An Intake Manifold Temperature (IMT) sensor can be found in the front/side of the intake manifold. For vehicles with this included, begin by unhooking the negative battery cable at your battery. After that, take off the engine cover and the air cleaner housing. Remove the electrical connector at the sensor and, with it disconnected, remove the sensor from the intake manifold. After installation, set the torque for the sensor back on the intake manifold at 28 Nm or 20 ft. lbs. Connect the electrical connector to the sensor, then install the engine cover and the air cleaner housing. Finally, attach the negative battery cable to the battery.