Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10
2001 Dodge Ram 2500 Car Speakers Parts and Q&A
Q: How to Replace Car Speakers in the Front Door on 2001 Dodge Ram 2500?
A: Start by disconnecting and isolating the battery negative cable before you change the front door speaker. Take off the front door trim and after that, remove the screws holding the speaker in the front door. Pull the speaker far enough from the mounting hole so that its wire harness connector is accessible, then release it from the connector on the front door wire harness. Unfixed the speaker from the door's inner surface. Once at the speaker, put it near the front door inner panel and reattach the wire harness from the speaker to the front door vehicle wire harness connector. Attach the speaker in the mounting hole of the front door panel and put in four screws, tightening them to 4 Nm (35 in. lbs.). After that, place the trim panel on the front door and reattach the negative cable to the battery.