Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Dodge Ram 2500 Submodels:
Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
2002 Dodge Ram 2500 Car Speakers Parts and Q&A
Q: How to Replace Car Speakers in the Rear Cab Side Panel on 2002 Dodge Ram 2500?
A: Before changing the rear cab panel speaker, cut off and isolate the negative battery cable. Take the trim off from the rear cab side panel. After that, remove the two screws holding the speaker in place on the cab side inner panel and move the speaker away from the hole so you can get to the wire harness connector. Remove the wire connector from the speaker connector receptacle and pull the speaker out from the cab side inner panel. Place the new speaker on the inner panel at the cab side and connect your body wire harness to the receptacle on the speaker. Put the speaker into the hole in the inner panel and attach the two screws by tightening them to 4 Nm (35 in. lbs.). Afterward, fit the trim onto the back of the cab panel and attach the battery negative cable.