How to Locate and Service a Fuel Pump Relay on 2001 Dodge Ram 2500?

The fuel pump relay is in the Power Distribution Center (PDC) and its location is identified by the lable on the cover of the PDC. Remove PDC cover and then take the relay out of the PDC to service the relay. Check the relay terminals for any damage or corroded terminals and the PDC connector terminals for any damage or corrosion and make necessary repairs prior to reinstallation of the relay. Also, make sure the pin height variability within PDC connector terminals is similar and fix if necessary. After installing the relay, reinsert it in to the PDC and then reinstall the PDC cover.

OEM 2001 Dodge Ram 2500 Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2001 Dodge Ram 2500 Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS, 8.0L V10

2001 Dodge Ram 2500 Fuel Pump Relay Parts and Q&A

Q: How to Locate and Service a Fuel Pump Relay on 2001 Dodge Ram 2500?
A: The fuel pump relay is in the Power Distribution Center (PDC) and its location is identified by the lable on the cover of the PDC. Remove PDC cover and then take the relay out of the PDC to service the relay. Check the relay terminals for any damage or corroded terminals and the PDC connector terminals for any damage or corrosion and make necessary repairs prior to reinstallation of the relay. Also, make sure the pin height variability within PDC connector terminals is similar and fix if necessary. After installing the relay, reinsert it in to the PDC and then reinstall the PDC cover.