How to Properly Service and Repair a Rear Seat Belt and Retractor on 2001 Dodge Ram 2500?

Make sure to look over all seat belts, buckles, mounting parts and retractors after your car seat belt is serviced. If you come across a torn, cut or frayed belt, change it and if any belt is twisted, straighten it. Exchange any belt that has a snap or retractor that doesn't work and any belt with a deformed or damaged latch plate or anchor plate. Repairing a seat belt part is not allowed; only replace any parts that have problems with new, unused and listed parts in the Mopar Parts Catalog. The rear seat belt and retractor can be taken out by first pulling the rear seat from the car. After that, take off the trim cover from the door sill, then remove the screw that holds the lower seat belt anchor plate to the quarter inner panel close to the base of the C-pillar. Lift the rear shoulder belt loop cover and remove the unusual screw that holds the turning loop to the quarter inner panel near the top of the C-pillar. Next, drop the trim of the quarter inner panel, remove the rear seat shoulder belt turning loop and unconnect the lower seat belt anchor plate from the trim. Unscrew the retractor attached to the quarter inner panel and then take out the rear shoulder belt and retractor from the panel. For installation, mount the rear shoulder belt retractor onto the quarter inner panel and screw it tight to 40 Nm (29 ft. lbs.). After turning the rear seat shoulder belt turn loop and placing the lower seat belt anchor plate with the quarter trim panel, mount the quarter trim back onto the inner quarter panel. Place the shoulder belt loop onto the quarter inner that is closest to the top of the C-pillar, secure and screw the loop in place at 40 Nm (29 ft. lbs.), fold the cover over the rear loop and snap it shut to hide the screw head. Set the lower seat belt anchor plate onto the quarter inner panel close to the base of the C-pillar, hold it and mount it to the quarter inner panel using a 40 Nm (29 ft. lb.) screw, then mount the cover onto the door sill. Finally, fit the rear seat into its position inside the passenger area.

OEM 2001 Dodge Ram 2500 Seat Belt

Seat Safety Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Seat Belts found

View related parts
2001 Dodge Ram 2500 Lap Belt, Front Center Part Number: 5GE47LAZAA
$50.57 MSRP: $97.15
You Save: $46.58 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Tip Half; Seat Belt, Front Center; Seat Belt Assembly; Lap Belt Tip Half
- Position: Front Center
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.5 x 3.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GE47LAZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Seat Belt Assembly, Rear Inner Part Number: 5EX58SAZ
$56.28 MSRP: $71.35
You Save: $15.07 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Latch; Seat Belt, Buckle & Buckle; Seat Belt Rear Inner
- Position: Rear Inner
- Item Weight: 0.70 Pounds
- Item Dimensions: 11.2 x 3.1 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX58SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap Belt, Rear Inner Part Number: 5EX59SAZ
$58.39 MSRP: $74.01
You Save: $15.62 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seat Belt - Rear Inner; Seat Belt Assembly; Seat Belt, Buckle And Adjuster; Seat Belt Rear Inner
- Position: Rear Inner
- Item Weight: 1.70 Pounds
- Item Dimensions: 11.2 x 3.7 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX59SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap & Shoulder Belt, Front Outer Driver Side Part Number: 5GD71LAZAB
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Left; Seat Belt Assembly; Seat Belt Front Outer
- Position: Front Outer Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 11.4 x 5.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GD71LAZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap Belt Part Number: 5EX61SAZ
Product Specifications
- Other Name: Seat Belt - Buckle And Tip; Seat Belt Assembly; Latch; Belt, Lap (Buckle And Tip); Seat Belt Buckle And Tip
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.4 x 5.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX61SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Seat Belt Assembly, Front Inner Part Number: 5GT65LAZAD
Product Specifications
- Other Name: Seat Belt - Front Inner; Seat Belt Receptacle, Front Inner; Latch; Seat Belt Front Inner Driver
- Position: Front Inner
- Item Weight: 1.20 Pounds
- Item Dimensions: 8.2 x 2.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT65LAZAD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap & Shoulder Belt, Front Outer Part Number: 5GT81LAZAA
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Assembly; Seat Belt Front Outer
- Position: Front Outer
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.2 x 8.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT81LAZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Seat Belt Assembly, Front Center Part Number: 5GE461AZAA
Product Specifications
- Other Name: Seat Belt - Buckle Half; Seat Belt Receptacle, Front Center; Latch; Lap Belt Buckle Half
- Position: Front Center
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 3.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GE461AZAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Seat Belt Assembly Part Number: 5EX64SAZ
Product Specifications
- Other Name: Seat Belt - Buckle Half; Latch; Seat Belt Buckle Half Right Side for Standard Cabs, Manual Seats, Inner Assembly.
- Item Weight: 1.30 Pounds
- Item Dimensions: 11.4 x 5.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX64SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap Belt Part Number: 5EX63SAZ
Product Specifications
- Other Name: Seat Belt - Tip Half; Seat Belt Assembly; Belt, Lap (Tip Half); Lap Belt Tip Half
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.3 x 5.4 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX63SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap Belt Part Number: 5EX62SAZ
Product Specifications
- Other Name: Seat Belt - Buckle Half; Seat Belt Assembly; Latch; Lap Belt Buckle Half Center.
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.9 x 4.0 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX62SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Seat Belt Assembly Part Number: 5EX60SAZ
Product Specifications
- Other Name: Seat Belt - Buckle And Tip; Latch; Belt, Lap (Two Buckles); Lap Belt Two Buckles
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5EX60SAZ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Seat Belt Assembly, Front Inner Part Number: 5GT64LAZAC
Product Specifications
- Other Name: Seat Belt - Front Inner; Latch; Seat Belt Front Inner Passenger
- Position: Front Inner
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.1 x 2.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT64LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap & Shoulder Belt, Rear Outer Part Number: 5GT78LAZAC
Product Specifications
- Other Name: Seat Belt - Rear Outer; Seat Belt Lap and Shoulder Belt, Rear; Seat Belt Assembly
- Position: Rear Outer
- Replaces: 5GT78LAZAB
- Item Weight: 2.10 Pounds
- Item Dimensions: 4.4 x 3.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT78LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
2001 Dodge Ram 2500 Lap & Shoulder Belt, Front Outer Part Number: 5GT80LAZAB
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Assembly
- Position: Front Outer
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.3 x 4.5 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GT80LAZAB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Lap & Shoulder Belt, Front Outer Passenger Side Part Number: 5GD70LAZAC
Product Specifications
- Other Name: Seat Belt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Right; Seat Belt Assembly
- Position: Front Outer Passenger Side
- Item Weight: 2.00 Pounds
- Item Dimensions: 9.2 x 7.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5GD70LAZAC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Dodge Ram 2500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2001 Dodge Ram 2500 Seat Belt Parts and Q&A

Q: How to Properly Service and Repair a Rear Seat Belt and Retractor on 2001 Dodge Ram 2500?
A: Make sure to look over all seat belts, buckles, mounting parts and retractors after your car seat belt is serviced. If you come across a torn, cut or frayed belt, change it and if any belt is twisted, straighten it. Exchange any belt that has a snap or retractor that doesn't work and any belt with a deformed or damaged latch plate or anchor plate. Repairing a seat belt part is not allowed; only replace any parts that have problems with new, unused and listed parts in the Mopar Parts Catalog. The rear seat belt and retractor can be taken out by first pulling the rear seat from the car. After that, take off the trim cover from the door sill, then remove the screw that holds the lower seat belt anchor plate to the quarter inner panel close to the base of the C-pillar. Lift the rear shoulder belt loop cover and remove the unusual screw that holds the turning loop to the quarter inner panel near the top of the C-pillar. Next, drop the trim of the quarter inner panel, remove the rear seat shoulder belt turning loop and unconnect the lower seat belt anchor plate from the trim. Unscrew the retractor attached to the quarter inner panel and then take out the rear shoulder belt and retractor from the panel. For installation, mount the rear shoulder belt retractor onto the quarter inner panel and screw it tight to 40 Nm (29 ft. lbs.). After turning the rear seat shoulder belt turn loop and placing the lower seat belt anchor plate with the quarter trim panel, mount the quarter trim back onto the inner quarter panel. Place the shoulder belt loop onto the quarter inner that is closest to the top of the C-pillar, secure and screw the loop in place at 40 Nm (29 ft. lbs.), fold the cover over the rear loop and snap it shut to hide the screw head. Set the lower seat belt anchor plate onto the quarter inner panel close to the base of the C-pillar, hold it and mount it to the quarter inner panel using a 40 Nm (29 ft. lb.) screw, then mount the cover onto the door sill. Finally, fit the rear seat into its position inside the passenger area.